Continuing our moving series, today we made an OpenSCAD module for making the most important type of furniture at all: bookcases! Here we have some Bondes (now discontinued, sadly) and Hemnes from IKEA, as well as a low TV stand:
Thingiverse: http://www.thingiverse.com/make:77833
Settings: MakerWare .3mm/low on a Replicator 2 with the bookcases on their backs so that support is not required.
Technical notes, OpenSCAD flavor: Again we continue from the previous day’s code. The interesting thing today is that we added a parameter for number of shelves and used a for() loop to put them in. The tricky part was handling the translation correctly while putting in those shelves.
/////////////////////////////////////////////////////////////
// module for making bookcases //////////////////////////////
module bookcase(depth,length,height,shelves){
difference(){
// body of the bookcase
hull(){
translate(s*[0,0,0]) sphere(tiny);
translate(s*[length,0,0]) sphere(tiny);
translate(s*[length,height,0]) sphere(tiny);
translate(s*[0,height,0]) sphere(tiny);
translate(s*[0,0,depth]) sphere(tiny);
translate(s*[length,0,depth]) sphere(tiny);
translate(s*[length,height,depth]) sphere(tiny);
translate(s*[0,height,depth]) sphere(tiny);
}
// minus an inside
translate(s*[.1*length,.1*length,-depth/2])
cube(s*[.8*length,height-.2*length,2*depth]);
}
// put in some shelves
for (i = [1:1:shelves-1]){
translate(s*[0,i*(height-.1*length)/shelves,0])
cube(s*[length,.1*length,depth]);
}
}