Day 194 – Pentagonal Hexecontahedron

Day 194 – Pentagonal Hexecontahedron

Day 194 – Pentagonal Hexecontahedron 640 480 mathgrrl

For the next week or two we will be modeling and printing wireframe models of various exotic polyhedra. On Day 192 we developed a method for doing this using Mathematica, MeshLab, and TopMod, and tested three types of meshes.  We like the Goldilocks one in the middle (not too angular and not too round), so today we applied it to a very beautiful polyhedron, the Pentagonal Hexecontahedron. This is now my favorite polyhedron; so irregular and yet so regular at the same time!

Thingiverse link:

Settings: We printed this on a Replicator 2 using our minimal-support MakerWare custom profile from Day 110. This profile is based on the Standard PLA profile, with the following modifications:

  • “roofThickness”: 0.5,
  • “floorThickness”: 0.5,
  • “sparseInfillPattern”: “linear”,
  • “infillDensity”: 0.2,
  • “minSpurLength”: 0.4,
  • “doSupport”: true,
  • “doSupportUnderBridges”: true,
  • “supportDensity”: 0.1,
  • “supportExtraDistance”: 0.8,
  • “supportModelSpacing”: 0.5,
Technical notes: To create the model for this object we used the same procedure we followed in Day 192, detailed below.
  1. Use Mathematica to create the polyhedron and export to STL:
    Export[“PentagonalHexecontahedron_math.stl”, %]
  2. Use MeshLab to convert to OBJ format.
  3. Use TopMod to remove edges or vertices that don’t belong in the wireframe, and then create the frame and remesh:
    Wireframe 0.250
    Remeshing/4-Conversion/Linear Vertex Insertion
    Remeshing/4-Conversion/Doo Sabin
    Export as STL
  4. Use MakerWare to size and orient the model. Specifically, Mathematica creates models in inches, so when this model is imported into MakerWare it will be very small (for example, a 2-inch model would only be 2 millimeters). Since there are 24.5 millimeters in an inch, we need to rescale by a whopping 2450%. This makes a really huge model so I scaled by another 50% before printing. By experimenting with the orientation of the model you can sometimes reduce the print time and amount of supports; in this case I re-oriented so that one of the pentagonal faces was flush with the build platform.
UPDATE: Mike Lawler (@mikeandallie on Twitter) alerted me to an related and even more amazing polyhedron posted on Mr. Honner‘s blog on the same day as this post: a beautiful wooden model of a Dual Snub Hexpropello Dodecahedron.  While you are clicking on links you should also check out Mike’s excellent blog mikesmathpage where he explores lots of interesting math with his kids!

Leave a Reply

Back to top